Thanks! We'll call you shortly to lock in your free driveway quote.
In a hurry? Call us now on 0473 631 096.
SprayCrete and decorative concrete systems deliver the visual appeal of exposed aggregate or stone paving: at a fraction of the cost of replacing the surface with the real thing. It's the finish that makes people do a double-take, because it looks like natural stone, but it's applied straight over your existing driveway concrete.
It's a popular choice for driveways, paths, and the apron leading into a garage: no ripping up the slab, no pavers, and it pairs perfectly with a new garage floor epoxy job so the whole approach to your home looks finished, not half-done.
Textured, earthy finishes that mimic exposed aggregate or stone paving: applied over your existing driveway slab.
A penetrating sealer protects against staining, fading and moisture: built to handle Sydney's outdoor conditions.
Overlaying your existing driveway costs far less than excavating and pouring new decorative concrete or pavers.
Pair it with a new garage floor so the transition from driveway to garage looks like one cohesive, professional job.
"Wanted the exposed-aggregate look without ripping up a perfectly good slab. SprayCrete over the top was exactly the answer, natural, textured, and it wasn't slippery at all in the rain."
"Did the driveway and the garage apron together so it reads as one job, not two. Sez matched the colour tone perfectly across both."
Your driveway sees full sun, full weight, and full weather, every day. Most standard coatings fade, crack, or lift within a couple of years under those conditions. Searching for driveway epoxy in Sydney that's actually built for it? Our outdoor driveway systems are specifically engineered for Australian UV exposure, rain, and vehicle loads.
We use Durastone hybrid stone systems and outdoor-rated epoxy that are non-slip when wet, UV-stable against fading, and strong enough to handle the weight of vehicles every single day without cracking or delaminating.
Your driveway is the first impression of your home. Make it one that holds up, and looks exceptional doing it.
Sydney's UV index is brutal. Our driveway systems use UV-stable topcoats that resist colour fade and yellowing for the life of the coating.
Anti-slip aggregate is embedded in every driveway topcoat as standard. Safe underfoot even in heavy rain: no glazed surface that becomes a slip hazard.
We never acid-etch. Mechanical diamond grinding is the only method that properly opens concrete pores for a permanent bond, which is why our floors don't peel.
Not a verbal promise. A written document with Sez's name on it: if the coating fails due to workmanship, we come back and fix it.
Standard indoor garage epoxy systems used outdoors will yellow, fade, and become slippery when wet. We only use outdoor-rated systems with UV-stable topcoats and anti-slip aggregate for driveway applications: it's a non-negotiable part of our spec. If a contractor quotes you driveway epoxy without mentioning UV stability or slip resistance, ask more questions.
"Front driveway looks completely different. Guests always comment on it. Zero fading after 18 months in full Western Sydney sun, impressive stuff."
"We sold our home 8 months after having the driveway coated. Three buyers specifically mentioned how good the driveway looked. Best return on investment for a trade job I've ever had."
Polyaspartic is the premium upgrade over standard topcoats, and it's especially suited to driveways, which get far more direct UV exposure than an indoor floor ever will. It cures dramatically faster, meaning less time your driveway is out of action, and it won't yellow under UV exposure over the years the way standard epoxy topcoats can.
It's the finish we recommend for full-sun driveways, and for anyone who can't afford to have the driveway closed off for long. Some jobs can be driven on again within 24–48 hours.
Back to using your driveway days sooner than a standard system: ideal if it's your only off-street parking.
Driveways get full, direct sun all day. Polyaspartic holds its colour and gloss long-term where standard topcoats can amber.
One of the toughest topcoats available for handling hot tyres straight off the road: a common failure point for cheaper systems.
Handles Sydney summer heat and winter rain without the application-window headaches of standard epoxy.
"Asked specifically about yellowing since our driveway gets sun literally all day. A year on it looks exactly like day one, no amber tint at all."
"Had it done Friday, driving on it again by Sunday morning. For our only driveway that turnaround mattered more than anything else."
Not every driveway needs a stone-look or decorative finish. A plain, solid colour outdoor coating is the most affordable way to get a genuinely durable, professional-grade driveway: charcoal, grey, and terracotta are the most requested tones.
The important thing is that "budget finish" never means "budget prep." Every plain colour driveway still gets the full diamond grind, joint treatment and UV-stable topcoat: it's the decorative pigment being left out, not the durability.
The lowest-cost way into a genuine outdoor-rated coating system: same prep, same warranty, simpler pigment.
No texture to catch dirt or leaf litter: a plain sealed driveway is the fastest to hose down and keep looking sharp.
Suits homes that want a crisp, uniform colour rather than a textured or decorative stone-look finish.
Plain colour still gets the identical diamond-ground prep and UV-stable topcoat as every other driveway finish.
Full-broadcast flake isn't just a garage finish: outdoors it adds real, textured grip underfoot on a surface that's exposed to rain and hosing far more than any garage floor. It hides tyre marks, oil drips and general wear far better than a plain sealed surface.
It's a popular choice for driveways and paths leading to a pool or entertaining area, and for homeowners who want their driveway to visually match a full-flake garage floor for a seamless, one-job look.
The textured flake surface adds genuine slip resistance beyond standard anti-slip aggregate: ideal near pools and entries.
Choose from a range of flake colour blends to complement your home's exterior: no two driveways look identical.
The broadcast texture disguises daily wear far better than a smooth, plain finish: stays looking sharp for longer.
Same mechanical grinding and multi-coat build as every N&A driveway system, backed by the 7-year warranty.
No surprises. Here's exactly what to expect from first call to finished driveway.
Sez visits your property, measures your driveway, and gives you a written quote on the spot: no guesswork, no call-centre. Most quotes are same or next day.
Before a drop of coating goes down, the slab is mechanically ground and joints are treated. This is the step most operators skip, and it's why their driveways crack and lift. We never skip it.
Applied over 1–2 days with a UV-stable, non-slip topcoat. Once cured, you get a written 7-year workmanship warranty: not a verbal promise, a document with Sez's name on it.
No travel surcharges, no hidden fees: one price, all of Sydney. Some of the suburbs we coat driveways in every week:
Whether you need driveway epoxy in Silverwater, driveway coating in Marsden Park, a Durastone driveway in Botany, or SprayCrete anywhere from Parramatta to the Inner West, N&A quotes every Sydney driveway the same way: diamond ground prep, a written 7-year warranty, and one flat price with no travel surcharge.
The number one cause is poor surface preparation combined with no control over existing expansion joints. If a contractor skips mechanical diamond grinding or coats straight over a joint without protecting it, the coating will crack or lift with the concrete underneath. N&A diamond grinds every driveway and treats expansion joints properly, which is why our work is backed by a 7-year warranty.
Most driveways take 1–2 days on-site depending on size and finish. You can walk on it after 24 hours, and drive on it after 72 hours for standard systems: polyaspartic topcoats can allow driving sooner. We'll confirm exact timing for your driveway at the quote.
Yes, the driveway needs to be completely clear of vehicles, pot plants, bins and anything else before work starts. We'll confirm timing with you when booking so you can plan around it.
Completely free. Sez will come out, measure up, and give you a written quote with no obligation and no charge. Most quotes are done same or next day, and we bring colour and finish samples with us.
A basic concrete sealer sits on top of existing concrete and mainly reduces staining: it doesn't hide cracks, wear, or colour inconsistency, and needs reapplying every year or two. A proper driveway coating system (Durastone, SprayCrete, or full-solids epoxy) is diamond ground into the surface, resurfaces and re-colours the whole driveway, and is built to last well over a decade with a written warranty.
We cover all Sydney suburbs: from Penrith to Bondi, Hornsby to Cronulla. There are no travel surcharges and no hidden fees. One price, Sydney-wide.
As a rough guide, driveway coatings typically run $65–$120 per square metre depending on the system chosen and the condition of the existing concrete: plain colour sits at the affordable end, and Durastone or polyaspartic sit at the premium end. A single driveway (around 40–60m²) is commonly $3,000–$6,000, with larger or double driveways higher. We give exact, written pricing at a free on-site quote rather than a phone estimate, because slab condition and prep required change the number.
Durastone is our most popular all-rounder: a hybrid stone-look system built for Sydney's sun and rain. SprayCrete suits homeowners after a natural exposed-aggregate or stone-paving look without the cost of replacing the concrete. Polyaspartic is worth it if you need the driveway back in use fast or it faces direct all-day sun. Plain colour is the affordable, low-maintenance option. Flake broadcast adds extra texture and grip, often chosen alongside a matching garage floor. We'll talk you through what suits your driveway at the free quote, not just upsell the most expensive option.
A properly diamond-ground driveway system with UV-stable topcoats and correctly treated joints lasts 10–20+ years depending on the system and traffic. Lifespan comes down almost entirely to prep and using genuinely outdoor-rated products: driveway coatings that fail early are almost always missing one of the two.
Yes. Cracks and joints are repaired and the slab is diamond ground before coating, which also removes oil staining and evens out minor surface imperfections. Significant structural movement or major slab damage may need repair first. We'll flag this at the quote if it applies to your driveway.
Not with our systems. Unlike standard indoor epoxy, every driveway job uses outdoor-rated, UV-stable topcoats specifically because driveways get full, direct Australian sun all day. Polyaspartic topcoats are the most UV-stable option if your driveway is especially sun-exposed.
No, anti-slip aggregate is embedded into every driveway topcoat as standard. It stays safe underfoot in Sydney rain, from sprinklers, or when hosing the car down.
Our systems are designed to go over existing poured concrete driveways. Loose pavers or badly deteriorated exposed aggregate may need assessment first. In some cases SprayCrete can be applied over a stable aggregate base to refresh the look without full replacement. We'll assess your specific surface at the free quote.
Our multi-coat systems are far more durable than a basic sealer and don't need annual resealing. Very high-traffic or long-term driveways can benefit from a maintenance topcoat refresh well down the track, but this is optional, not required upkeep.
Our full-solids, multi-coat driveway systems are built for daily vehicle loads including larger vehicles, trailers and caravans. For driveways with regular heavy vehicle traffic, we can recommend a heavier-duty build or polyaspartic topcoat at the quote.
The driveway is the first thing buyers and agents see at an inspection. A clean, even, stone-look or resurfaced driveway removes a common objection and photographs well for listings: it's one of the highest-visibility, lowest-cost street appeal upgrades available.
Free quote, no call-out fee, no pressure. Most jobs start within the week.